Leave three blank spaces after your name to register
-
RAM Disk Saver
v2.0
158100157
771630015
571760507
158370362
-
RAM Doubler
v2.0.1
v1.6.1
584303
vAll
To use the installer without the master disk, change code 2 offset 175c from
66 to 60
Version: "All"
No MasterDisk
CODE 2, Offset 1752
6632 -> 6032
-
RandomNoise Coda
vAll
0YA45CKILINKCAKD
1st character is a zero.
162x-20dk1-gik92-2569
-
RapidCD
v1.0.4
0300-0400-7863-5382
-
RapidTrak
600001201
-
Ray Dream Designer
v5.0.1
3D-501-2-4750-54899
v5.0
SM-00002-0-1-54637
v4.1.3D
Funpack:
3D Fun Pack: FP-100-1-1737-45089.
Professional Lens Pack: LP-100-1-1843-42914.
SuperMesh: ZA-100-1-1357-56203.
4 Elements
4E-100-1801-22085
v4.1
DM-410-1-1433-57131
v4.0.3fc
DM-403-1-2051-31836
DM-403-1-2116-14832
SM-00000-0-1-54633
SM-00001-0-1-54569
SM-00002-0-1-54637
v3.1.1
RD-301-1-2116-14832
v4.0
RD-403-1-9999-24894
-
Ray Dream Studio
v5.0.1
3D-501-2-4750-54899
v5.0J
ST-500-1-3324-59147
v5.0
SM-00002-0-1-54637
4 Elements
4E-100-1801-22085
v4.1
Needs SN: Follows this pattern:
SM-nnn-n-nnnn-nnnnn
(n = number)
v4.1J
DW-414-1-4684-1980
v4.0.3fc6
SM-00000-0-1-54633
SM-00001-0-1-54569
SM-00002-0-1-54637
†4 Elements
4E-100-1801-22085
Funpack: 3D Fun Pack: FP-100-1-1737-45089.
Professional Lens Pack: LP-100-1-1843-42914.
SuperMesh: ZA-100-1-1357-56203.
-
RayGun
v1.1.0
1072-0100-03132324-460246-579236
†You must download the plug-in installer for intended target program (Deck II, Peak, Premiere, Digital Performer, Studio Vision, etc) from www.arboretum.com to use the above number.
-
ReadMe Generator
v1.x
RMG-98-25
-
ReadySetGrow!
v1.0
20475
-
Real Audio Pro
v2.1.1
0094-26-7618
-
RealBasic
v1.1
91-2577-71877-370
This one should work, it did for me,
48-8126-14792-696
v1.0
00-0102-40043-423
48-8126-14782-69
81-4505-48145-053
-
REAL DEAL® Video Poker
vAll
Password: elvisiskingvivalasvegas
-
Realmz
v5.1
To register the main program, and consequently the first scenario, take your serial # and divide it by 24. Drop everything after the decimal point. Add 24 to this. Now multiply that by 15 and subtract 156. This is your registration #. To register the next three scenarios, use the following:
Prelude to Pestilence: Name: MoonDark Number: 175973540
Assault on Giant Mountain: Name: MoonDark Number: 403273572
Castle in the Clouds: Name: MoonDark Number: 181560444
You will notice that these numbers are 100 added to the registration codes for version 4.4.4 as in C&N. However, the numbers in C&N for Destroy the Necronomicon is NOT good, and I tend to doubt the other numbers for Griloch's Revenge and White Dragon will work either, as they are only 8 digits...
v5.x
Enter 617 instead of 911 to be able to enter the serial number and to your REGISTRATION number you must add 100 to it to make it valid. If it was 9678654 now it's 9678754.
v4.6.3
SN: 12345678 Code: 7716149
v4.2.2
vCracking info
Main Program
Enter 911 as registration code to change your SN, then use
Serial Number: 999999999
Registration Code: 625000094
Scenarios
Prelude to Pestilence
Registration Name: MoonDark
Registration Code: 175973540
Assault on Giant Mountain
Registration Name: MoonDark
Registration Code: 403273472
Version: "2.0"
Warning: The above SN# info has been comprimised as of version 2.0.3 or higher. Some asshole(s)
posted the info on the internet and the author apparently took some countermeasures
- so you'll just have to suffer until (if i decide to) get around to reverse engineering it again.
Grilochs Revenge
Registration Name: MoonDark
Registration Code: 60292014
White Dragon
Registration Name: MoonDark
Registration Code: 51623504
Castle in the Clouds
Registration Name: MoonDark
Registration Code: 181560344
Destroy the Necronomicon
Registration Name: MoonDark
Registration Code: 34629785
Version: "2.0"
Registration Code = any number within the range 104+INT(SN/24)*15 +/- 14 ,where SN
is the serial number.
***
ie if SN=11603111 then RC=any number in the range 7252034 +/- 14
Another:
Each Realmz application has a unique serial number which is displayed on the
title page (upper left corner I think). What you're looking for is the
registration code.
To obtain the registration code follow these steps:
1. Find & note the serial number (SN).
2. Divide the SN by 24.
3. Remove all numbers to the right of the decimal point.
4. Multiply by 15.
5. Add 104.
Enter this registration code on the title page, then enter any name. Realmz
is now registered.
v3.0.x
SN#1888300270 RC#1180187748
v2.x.x
enter RC#911 to change your SN#
SN#0334536530 RC#0209085434 +/- 14
SN#0245392317 RC#0153370289 +/- 14
SN#0518323596 RC#0323952344 +/- 14
SN#1253007968 RC#0783130079 +/- 14
SN#1238331947 RC#0773957564 +/- 14
v2.0
SN#11603111 RC#7252020 (Min for this SN#)
SN#11603111 RC#7252048 (Max for this SN#)
-
Realmz Assault on Giant Mountain
v4.2.2
Registration Name: MoonDark
Registration Code: 403273472
Version: "2.0"
Warning: The above SN# info has been comprimised as of version 2.0.3 or higher.
Some asshole(s) posted the info on the internet and the author apparently took some
countermeasures - so you'll just have to suffer until (if i decide to) get around
